MAGNA-STITCHER
TM
INSTRUCTIONS
Plastic Repair Kit
Model MS-1-KIT
Patent Pending
*
WARNING:
Read and understand all instructions before attempting to operate tool.
Failure to follow instructions may result in electric shock, fire and/or serious
personal injury.
Review and follow all instructions for your electric stud welder.
If you do not have the original instructions for your stud welder, contact the
manufacturer for a replacement copy.
IMPORTANT SAFETY INSTRUCTIONS
*
8
To reduce the risk of serious
injury and/or property damage,
observe all warnings and
instructions while operating the
tool.
Keep work area clean and well
lit. Maintain tool in top condition and
obtain service from manufacturer if
tool malfunctions. Use only
accessories and replacement parts
that are provided by the
manufacturer.
Stud welder must be connected
to a properly grounded outlet
installed in accordance with all local
codes and ordinances. Never
remove the grounding prong or
modify the plug in any way. Do not
use adapter plugs. Consult an
electrician if you are in any doubt as
to whether the plug is properly
grounded. Avoid bodily contact with
grounded surfaces.
=
!
A
Always wear proper personal
protection when operating welder.
A full face shield per ANSI Z87.1-
2003 standard is required at all times
to protect face and eyes against
injury from flying parts. Adequate
gloves and clothing are required to
reduce the risk of burns. Allow parts
to cool before handling.
Do not operate tool in explosive
atmospheres
, such as in the
presence of flammable liquids,
gases or dust. Welders create
sparks which may ignite dust or
fumes. Use in well ventilated areas
only. Welders generate heat which
can ignite surrounding materials
causing fires.
SAVE THESE INSTRUCTIONS
IF YOU HAVE ANY QUESTIONS ABOUT THE OPERATION OF PRODUCT CALL TOLL FREE
800-227-2822
8:00 am to 5:00 pm - Pacific Time - Monday through Friday