10
GETTING ST
AR
TED
model no. 011-2103-8 / 011-2104-6 | contact us 1-888-942-6686
HARDWIRE INSTRUCTIONS
This inverter comes equiped with an optional AC output hardwire connection to allow for direction
connection to an off-grid electrical panel. All AC wiring ( inverter to AC panels, AC panels to circuit
breakers, and GFCIs) must be rated to at the current rating of the fuses and/or circuit breakers. Multi-
strand wire is required. Typically, 15A circuit breaker requires a 12 AWG wire.
Always make sure unit is completely disconnected from any power source while insalling or adjusting any
AC output connections.
Begin by unscrewing the front plate which is located under the 2 x AC outlets at the front of the inverter.
You will then see the 3 connecting terminals, as illustrated below:
NEUTRAL
N
EARTH GROUND
E
HOT
H
H
N
E
