ASSEMBLY INSTRUCTIONS
Put the bracket seat assembly (1) upright,
then align the holes of foot base (2) with the
holes on the column (1), use the screws (3),
flat washer (4), lock washer (5) and nuts (6)
to fix and tighten it. (Fig. A)
1
2
Put the pump assembly (13) upright on the
bracket seat assembly (1), use the bolts (11),
flat washers (4) and nuts (6) to fix and tighten
it. (Fig. C)
3
4
Put the caster (7) into the hole as shown on
diagram, use the flat washer (8), lock washer
(9) and nut (10) to fix and tighten it, ensuring
the caster’s mobility. Repeat for each caster.
(Fig. B)
Fig. A
Fig. B
Fig. C
Fig. D
Put the bracket plate assembly (14) on the piston
rod and fix it by using the bolt (18). Then put the
slide (28) on the bracket plate assembly (14) as
shown on diagram, and fix it by using the bolt
(19), flat washer (4) and nut (6). Then tighten the
safety block (23) on the slide (28) by using the
bolt (19), flat washer (4) and nut (6). Screw on
and tighten the circular bolt (22), flat washer (4)
and nut (6) to safety block (23). Then put the
chain hook (24) through the chain hook seat (25)
as shown on diagram, and lock it with the flat
washer (26) and wing nut (27). Insert the other
end in D shackle (21) and lock it, hang one end
of the chain (20) on the chain hook (24),
3
5
4
6
1
2
2
15
16
17
7
8
9
10
7
8
9
10
7
8
9
10
1
7
2
8
9
10
2
1
13
6
4
11
6
4
11
13
18
4
4
4
14
19
19
20
21
22
24
23
23
25
26
27
28
28
6
6
6
7
ASSEMBLY INSTRUCTIONS
