- 28 -
Vehicle Storage
Storage
For a motorcycle not to be used for a long period of time, for example, in winter or fall, some steps should
be taken to prevent malfunction of and damage to components, which might be caused by long storage.
Maintenance must be preformed before the long storage, for fear that it might be forgotten when vehicle is
put back into use after storage.
·
Change engine oil and oil filter.
·
Drain off fuel from the fuel tank and carburetor, spray atomized anti-rust oil onto the inside wall of the
tank and then close the tank.
Warning: DANGER DANGER DANGER
Gasoline is very flammable and can cause fire and even explosion under certain
conditions. Therefore, do not smoke, make sparks or be careless when working with
GAS!
Take out the spark plug, pour about 15~20ml clean engine oil into the cylinder, turn over engine
and finally reinstall spark plug.
Store vehicle in a shady and cool place free from humidity and direct sunshine.
After washing and drying, Coat all screws or metal pieces with a light coat of oil.
Wash the motor, wipe it dry and apply an even coat of wax to all painted surfaces.
- 29 -
Using the bike after removal from storage
•
When storing time is more than 4 months, you should change the oil.
•
Recharge and replace the battery.
Please check and perform pre use inspection like a new scooter.
Vehicle identify Number
Your bike has assigned a VIN (Vehicle Identification Number)
（
Fig28
）
You should know your VIN and engine number to allow you easy access to parts and technical information
Your tool set
The tool bag in the seat trunk
（
Fig29
）
c
ontains the following:
8*10 wrench 12*14 wrench
Screwdriver Spark plug wrench
Fig28
Fig29
VIN located here on center fork.
Model listed here.
Engine number listed here.
