Page 12
Setting trolley to run straight
Adjusting the Front Wheel Alignment
If your trolley is not running in a straight line, there are a couple of adjustments that can be made. This problem can be caused by
a number of factors including a slightly loose bag support or an unevenly packed golf bag. The first thing to alter is the alignment
of the front wheel. This is to be completed on a flat level surface whilst using the trolley in remote mode then follow these steps:
1. Rotate the front wheels 180˚ to allow access to the quick release lever (fig. 1)
2. Pull down the quick release lever (fig. 2)
3. There are two small metal dials on either side of the housing that are used to realign the wheel (fig. 3)
4. If your trolley is veering to the right, you will need to turn the left hand dial clockwise and the right hand dial anti-clockwise
5. If your trolley is veering to the left, you will need to turn the right hand dial clockwise and the left hand dial anti-clockwise
6. Push the quick release lever back up until it firmly clips in to place (fig. 4)
7. Rotate the wheel back 180˚ so that it sits underneath the housing (fig. 5)
This procedure can be carried out until the trolley is moving in a straight line (you may only need to adjust one dial at a time).
These instructions are based on being in front of the trolley looking at the wheel whilst it is in front of the housing.
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
