MotoAlliance
MA11765 CFMOTO U-Force
23001 Industrial Blvd
Rogers, MN 55374
866.527.7637
866.527.7637
4
4.
Hang the two MA11765-4 Rear Support Brackets over the side chassis members
toward the rear of the MA11765 Main Mounting Plate as shown in Figure 4.
Insert 3/8
’’ x 1’’ Serrated Flange Bolts from the top of the Support Brackets and
loosely thread the Serrated Flange Nuts on the bolts. (NOTE: Do not tighten at
this time)
Figure 4
5.
Replace the hardware removed in Step 2. Make sure it runs through the bumper
and through the MA11765 Main Mounting Plate as shown in Figure 5. Spin the
nuts on but do not tighten down at this time.
Figure 5
