MotoAlliance Yamaha Grizzly 660
MA11103
23001 Industrial Blvd
Rogers, MN 55374
866.527.7637
866.527.7637
3
3. Lock washer should be place between the head of the bolt and the flat washer.
Do not tighten the bolts all the way;
you will do this later in the installation
.
Installed properly, the brackets will bend inward.
4. Cut away any material on the skid plate with a serrated blade that may interfere
with the right mounting bracket. There should be no interference with the left
mounting bracket.
5. Place the cross-member plate between the two bracket plates.
6. Insert the plow mounting pins; this will help align the mount. The top holes on the
cross-member plate should be toward the front of the bike.
7.
Using four ¼” bolts and nuts, attach the cross-member the bracket plates. Each
bolt will go through a
½” spacer positioned between the cross-member and the
brackets as shown in Figure 2.
Figure 2
8. Tighten all bolts down snuggly. The plow mounting pins can now be removed
and stored.