MotoAlliance
MA11737
866.527.7637
3. Hold the mount up to the underbody of the Teryx 4
bit, drill two holes through the plastic underbody cover,
on the plow mount as a guide. Secure the rear of the mount usin
bolts and the two buckle pieces included in your kit.
4. Included in your plow mount kit is a spacer that is to be used in conjunction with
the MotoAlliance winch mount. Place the spacer behind the plow mount and on
top of the winch mounting area. The holes in the spacer will line up with the rear
holes of the Teryx 4 winch
align the winch mount with the holes in the plow mount and Teryx frame.
Reinstall the 3/8'' bolts in
kit. Secure all bolts at this time.
23001 Industrial Blvd
Rogers, MN 55374
4
motoinfo
Hold the mount up to the underbody of the Teryx 4 or Teryx 2. Using a 5/16'' drill
ugh the plastic underbody cover, using the two inside holes
on the plow mount as a guide. Secure the rear of the mount using the four 5/16''
bolts and the two buckle pieces included in your kit.
Figure 4
Included in your plow mount kit is a spacer that is to be used in conjunction with
the MotoAlliance winch mount. Place the spacer behind the plow mount and on
winch mounting area. The holes in the spacer will line up with the rear
holes of the Teryx 4 winch mount location. Remove the 3/8'' bolts from Step 2,
align the winch mount with the holes in the plow mount and Teryx frame.
Reinstall the 3/8'' bolts in addition to the hardware included in the winch mount
kit. Secure all bolts at this time.
23001 Industrial Blvd
Rogers, MN 55374
866.527.7637
. Using a 5/16'' drill
using the two inside holes
g the four 5/16''
Included in your plow mount kit is a spacer that is to be used in conjunction with
the MotoAlliance winch mount. Place the spacer behind the plow mount and on
winch mounting area. The holes in the spacer will line up with the rear
location. Remove the 3/8'' bolts from Step 2,
align the winch mount with the holes in the plow mount and Teryx frame.
addition to the hardware included in the winch mount