8
turn signal, taillight, brake light and horns) will be engaged too.
To switch the power off, turn the key counterclockwise to OFF position.
CAUTION!
When the Key is on
‘ON’ position, the key cannot be pulled out. Don’t try to pull out the Key when it’s on
‘ON’ position!
Forward/reverse switch
This is a three-position switch:
Up Position: Forward
Middle Position: Neutral
Down Position: Reverse
WARNING!
This switch must be fully pressed into the proper position. If not,
the electrical system/motor could become faulty.
NOTE:
When the F/R Switch is in the Down Position (Reverse), a Buzzer will activate which warns
pedestrians and vehicles behind the vehicle.
Accelerator pedal
The accelerator pedal is used to control the speed when driving. When pressing down
the accelerator pedal, the vehicle will start to move. Letting off the accelerator pedal
will cause the vehicle to slow down. Please note regenerative braking is included on
this vehicle. Regenerative Braking will activate when the driver takes his/her foot off
the accelerator pedal.
Service Brake pedal
The service brake pedal is used in braking.
SE DESIGN LE DESIGN
Parking Brake Pedal
The parking brake pedal is used in when the vehicle is being
parked. The parking brake should be engaged into parking
position whenever the vehicle is left unattended.
How to engage and disengage the parking brake?
Summary of Contents for Bubble Car
Page 4: ...4 Fig 2 Fig 3...
