www.motionrc.com
Motion RC User Guide for the Detrum RXC8 Receiver
Page 4
3.
Select
Model Set
and press
ENT
.
4.
Select
Model
and press
ENT
.
5.
Highlight the model you want to bind to the RXC8 and press
ENT
. The model you
selected becomes active.
6.
Press
EXT
twice to move back to the home screen.
7.
Turn the transmitter off.
8.
Use the
Motion RC Supplemental Guide
for your transmitter to determine which switch is
used to bind the transmitter to a receiver. For example, the GAVIN-8C uses the SC
switch while the GAVIN-6C uses the TRAINER switch. Some transmitters, such as the
GAVIN-6A, don’t have a specific switch for binding; instead you just turn on the
transmitter.
9.
Connect the RXC8 receiver to at least one servo and to the ESC; if the receiver is already
installed in a model, skip this step.
10.
Power the receiver by connecting a battery to the ESC. The Bind light on the receiver
flashes red quickly indicating that it isn’t bound to anything. The PWM (Pulse Width
Modulation)/PPM (Pulse Position Modulation) Mode light illuminates green for 2
