www.motionrc.com
Motion RC User Guide for the Detrum RXC6 Receiver
Page 3
When connecting servos to the receiver, ensure the control wire (orange or white) is toward the
top of the receiver. Make sure the servo connectors are firmly installed in the receiver to ensure
they don’t come loose during flight.
Bind the Receiver to a Transmitter and Model
To use the receiver, you must bind it to a transmitter. During this process, the transmitter and
receiver establish a unique code so that the transmitter recognizes the receiver as being used for a
specific model. This connection also prevents interference from other transmitters.
You only need to bind the receiver once for each model with which you use it. If you move the
receiver to a new model, you must bind it to that model (it won’t be bound to the previous model
any more).
It’s easier to bind the receiver to a model before installing it, but the same process works whether
the receiver is installed or not. Use the following steps to bind the RXC6 to a Detrum transmitter,
such as the GAVIN-6C (these steps may be different with other types of Detrum transmitters;
refer to the
Motion RC Supplemental Guide
for your transmitter for the specific steps for you):
