MotionOffice Arc 3, Assembly Instructions Manual

Page: 21 / 77

1
3
2
4
Place loop Ottomans as shown in this diagram from the inside outwards. Place worktops to the brackets and use top joining bolts to fix the worktops together, then
fix worktops to brackets using wood screws after checking alignment.
Start with curved panel, insert Pins into keyholes, slide down until top is flush.
Once panels are flush, slide pin on the underside of the panel across to lock panels together.
Feel along the steel frame for T-Nut under the fabric surface, and burn holes using soldering iron,
then bolt the brackets to the screens.
Expo
Assembly Instructions