Motion CM-12 Manual Download Page 2

CM-12 is a hand-held remote with 5 channels for operating 
and programming blinds at the push of a button. Blinds can 
be moved to any desired position or to a preset favourite 
position. The wall mounting clip for this remote control is 
included by default.

Safety

WARNING: 

Important safety instructions. Follow all instructions, 

since incorrect installation can lead to severe injury.

   Do not let children play with the blind and/or remote control.
   Take care that the blind can move freely and is not blocked by 

any objects. 

   Do not paint the device. 
   Keep the device dry. 
   Do not drop, knock, or shake the device. Rough handling can 

break internal circuit boards.

   Do not ingest battery, Chemical Burn Hazard" or equivalent 

wording

   This product contains a coin / button cell battery. If the coin / 

button cell battery is swallowed, it can cause severe internal 
burns in just 2 hours and can lead to death.

     Keep new and used batteries away from children.If the battery 

compartment does not close securely, stop using the product 
and keep it away from children. If you think batteries might 
have been swallowed or placed inside any part of the body, 
seek immediate medical attention.

     Replacement of a battery with an incorrect type that can defeat 

a safeguard.

     Disposal of a battery into fire or a hot oven, or mechanically 

crushing or cutting of a battery, that can result in an explosion.

     Leaving a battery in an extremely high temperature 

surrounding environment that can result in an explosion or the 
leakage of flammable liquid or gas.

     A battery subjected to extremely low air pressure that may 

result in an explosion or the leakage of flammable liquid or gas.

For the latest information and updated manuals, 

visit rtube.nl/cm-12

Channels Max.  

blinds

Frequency

Range 

Frequency 

emission power

Power  

supply

Length

Width

Height

Working 

 temperature

Certificates

5

unlimited 433.925 MHz

30 m with 

1 concrete 

wall

2.32dBm

CR2430 

3.0V

120 mm 45 mm

14 mm

-10°C

~

50°C

Summary of Contents for CM-12










Reviews: