Motion CM-04, Manual

Page: 22 / 124

1 1
3
+
+
23
22.1 22.2
22.3
23.3 23.4 23.5
23.1
22.4 22.5
22
23.2
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
To activate
channel select,
simultaneously
hold the
channel
selection button
and press the pair
button.
Press the pair
button on the (new)
remote to pair the
blinds with the new
channel. To exit channel
select, go back to the
channel selected at
step 22.1 and repeat
step 22.2
All blinds in the selected
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or a different
remote. Select a new
channel on the (new)
remote.
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
Select the channel
you would like to
copy. To activate
channel select,
simultaneously hold
the
channel selection
button and press the
pair button.
Press program
button on the (new)
remote to pair the
blinds with the
(new) remote. To exit channel
select, choose
the channel you
selected at step 23.1
and repeat step 23.2 All blinds in the selected
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or on different
remotes. Select a channel
on a (new) remote.
Channel select 5 channel remote
Select the channel
from which the
blinds must be
copied.
Channel select 15 channel remote
MOTION
C M - 0 4 T U B U L A R M O T O R