17
18
4.4 OPERATION OF FREE-WHEELING (N-D LEVER)
FREE-WHEELING (N-D LEVER):
• When lever is in Drive (D) position, the
scooter can be driven. Normal position is
in D (Figure 17)
• When lever is Neutral (N) position, the
scooter can be moved manually without
power (Figure 18)
Figure 17
Figure 18
4. INTRODUCTION & OPERATION OF SCOOTER
• Freewheel operation is only recommended on flat surfaces. Never leave your
scooter on gradient with its motors disengaged.
• When adjusting N-D lever, do not sit on the scooter.
• It’s not able to drive the scooter when the lever is in Neutral. You must turn
off the scooter first and switch to D lever, then turn on and drive scooter.
4.5 TILLER HEIGHT ADJUSTMENT
• Loosen (counterclockwise) the screw knob to adjust the
tiller height, tighten (clockwise) screw knob again to lock at
a desired position.
• There is a stop point on tiller, the height cannot exceed the
stop point (approx. 20cm) (Figure 19)
Figure 19
4.6 SEAT ADJUSTMENT / DISMANTLE
• Please refer to section 5 for scooter folding / unfolding.
• When scooter is being folding, the seat latch will
automatically release and seat will move backwards.
• After unfolding, the seat shall automatically move forwards.
However, please always double check and push the seat to
its locked position) manually if not.
• Do not get on the scooter if the seat is positioned in red
point(H).Get on the scooter only if the seat is locked in its
position green point ( Fig.20)
Figure 20
