Motic RED100 Series Instruction Manual Download Page 5

5

1. SAFETY INSTRUCTIONS

1.1 General safety instructions

• Please be sure to read these instructions before using the biological microscope. 
• Additional information is available upon request from our maintenance department or authorized agency. 
• To ensure safe operation and guarantee good performance of the microscope please pay attention to the precau- 
  tions and warnings specified in the Operation Instructions. 
• In this Operation Instructions manual, the following symbols indicate:

1.2 Instrument safety

The 

RED100 Series biological microscope has been designed, manufactured and inspected according to the  

EN 61010-1:2001 

Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use.

1.3 Unpacking, transportation & storage

• The original shipping container, a foam box in a fiberboard carton, should be kept for use in long term storage  

or return shipment.

• When unpacking, please check the components according to the packing list.
• Please comply with the temperature requirements for transport and storage specified in the appendix of this manual.
• Set up, use and store the unpacked microscope on a firm and flat workbench.
• Please do not touch the optical lens surfaces.

1.4 Waste disposal

• Important: Any damaged biological microscope must not be treated as general waste; it should be disposed  

of according to relevant regulations.

Caution! Electric shock hazard!

Caution! Danger!

Summary of Contents for RED100 Series





















Reviews: