fig 5
Attach the left side, using the
remainder of the 50mm bolts and
the Allen key.
3
4
fig 6
Screw 4 cam pins into the holes in
the back of the drawer front.
Insert 2 cams into the holes near the
front edge of each drawer front.
Ensure that the arrows (
X
) are
pointing towards the front edge.
X
fig 7
Fit the holes in the front edges of the
sides over the cam pins, so that the
pins enter the cams. Note that the
grooves in the sides must be facing
inwards and must align with those in
the drawer front. Using a
screwdriver, turn the cams clockwise,
as far as you can, in order to lock
the joint.
fig 8
Slide the drawer bottom (best face
upwards) into the grooves in the
drawer sides until it sits completely
in the groove in the drawer front.
fig 9
Fit the drawer back as shown,
allowing the 2 dowels in each end to
enter the corresponding holes in the
drawer sides. Ensure that the drawer
bottom slots into the groove on the
drawer back. Secure with the 2
remaining bolts (35mm), using the
Allen key provided.
Hook the two wheels on each side
at the back of the drawer over the
wheels of the runners attached to
the dresser sides. The drawer
should glide in smoothly.
fig 10