1
introduction introduccion
3
assembly
Attach the wardrobe door by sliding the
door hinges on to the hinge plates.
Secure the hinges in place by tightening
the locating screw on the hinge plate
using a cross head screw driver.
Picture 10
Attach the door handle to the wardrobe
doors using 1, M4 x 25mm domed head
screw.
The wardrobe door may require
adjustment to align correctly. The hinges
have an adjustment screw which when
turned clockwise allows the gap
between the door and the centre panel
to decrease. Turning the screw
anti-clockwise will increase the gap
between the door and the centre panel.
Make small adjustments and visibly
check the results and repeat on each
hinge until the doors are aligned
correctly.
attaching the door and door handles
9
8
