background image

WARNING - Never leave the child unattended in the cradle.
WARNING - It is dangerous to put this cradle on an elevated surface,
such as a worktop or bed.
Do not use near an open fire or any other kind of heater.
Keep children away from the cradle during set-up and when not in use.
Never use as a child restraint in a vehicle.
Never pick the cradle up with baby in it.
Do not use near stairs or steps.
Ensure the safety harness is fastened and correctly adjusted at all times.
Regularly check for loose or damaged parts and discontinue use
should parts become damaged or broken.
Do not use once the child starts to sit up unaided.
Never use the toybar as a carrying handle.
Do not use replacement parts or accessories other than those 
approved by Mothercare as they may make the cradle unsafe.

safety warnings

10

care of your product

9

Ensure that all metal parts are removed from cover before washing.
Ensure the frame is correctly re-assembled before use, by following
the instructions in section 3, preparation for use.
Regularly check that the frame remains securely assembled and that 
the fabric and stitching is undamaged. 

9

The seat cover can be removed
for cleaning.
Lift the footrest up then pull the whole
seat cover off from the top.
Wash in accordance with the care
instructions printed on the back.

Summary of Contents for Denim Brights












Reviews: