System Learning:
1. The method described in Precaution must be used to prevent the inner tubes of
actuators from rotating during the learning process.
2. Press the
︽
and
︾
buttons of the hand control at the same time until the actuators
start to move, then release the buttons.
3. The two actuators are retracted to the bottom at the same time at the same time.
During the process, the speed of the two actuators may be inconsistent. This is normal.
Do not apply external force to the actuators. Then the two actuators started to extend
to the end synchronously, and then retracted to the bottom again, and stopped
automatically, completing the system learning.
4. During the system learning process, the push rod should not be overloaded or the
clutch tripped. If this happens, please remove obstacles and other reasons before
re-learning the system.
5. After completing the system learning, you can turn off the power and carefully
mount the actuators on the frame to start using it.
Operation Method:
1. Extend
︽
both actuators synchronously.
2. Retract
︾
both actuators synchronously.
3. Press button
S
until LED indicator flashes slowly, and press button
1
,
2
or
3
to save
as preferred position number. The LED will flash quickly to confirm the position is saved.
4. Drive both actuators toward the memorized position
1
.
5. Drive both actuators toward the memorized position
2
.
6. Drive both actuators toward the memorized position
3
.
4
©2020 Apr. MOTECK. MO-I-0040 Version: 2.0
