33
*RST
Resets the MT4080 to the power on default status. The default
status is:
1KHz 1Vrms SLOW CpD uF mH Ohm
After the MT4080 is reset, it will beep once and returns the
“BEEP” string back.
ASC
Sets the format of the return value. This command sets the ASCII
string return or the numerical code.
PARAMETER:
ON
ASCII
string
OFF
Numerical
code
Example:
ASC
ON
FREQ?
1KHz
(
return value
)
ASC
OFF
FREQ?
2 (
return value
)
CORR OPEN
Performs the open calibration. This command sets the MT4080 to
do the open calibration. After the calibration is done, the MT4080
will beep once and returns the “BEEP” string back.
CORR SHORT
Performs the short calibration. This command sets the MT4080 to
do the short calibration. After the calibration is done, the MT4080
will beep once and returns the “BEEP” string back.
