7
BEFORE FIRST FLIGHT
Install Landing Skids and Position Antennas
(2) Insert the two antennas through the holes of the landing skids.
(3) Secure an antenna rubber plug on landing skid and guide the
antenna out of the antenna hole.
(4) Place 8PCS M2.5*10 screws into the screw holes and tighten
them with the M2.0 hexagon screwdriver as shown.
(5) Secure the head of the antenna to the inside relevant position
of the landing skids as shown.
Rubber plug
antenna head position
Screws
M2.5X10
1. Remove the A and B screws below the motor.
2. Insert the two positioning pillars of each fender bracket
into screw holes A and B and secure with the fender bracket
screws (size M3*12).
A
B
A
B
