10
are behind it, pushing the
Directional Flight Stick
forward will send it south.
Flight Direction Assist can be used to bring your drone closer should it be too far
away to determine direction of flight.
Caution: Flight Direction Assist is not recommended for novice pilots. Please do
not use this mode if you are not yet an experienced pilot.
Warning: Do not fly your drone beyond line of sight unless permitted in your
jurisdiction.
(4)
Altitude Hold:
After take-off in Manual Flight mode, set the
SWA
switch at
2
and the
SWB
switch at
1
, and then use the
Throttle Flight Stick
to attain the desired
altitude. Center the
Throttle Flight Stick
in the middle position. The controller will
confirm the
Throttle Flight Stick
is centered by beeping three times.
The drone will maintain its altitude during Manual Flight.
NOTE: The drone’s position may vary depending on factors such as wind and weather.
(5)
Return Home:
Switch into Auto Hover mode, then set the
SWA
switch at
2
and
the
SWB
switch at
0
. The drone will return to the point of take-off.
If the return point is higher than 15 meters / 50 feet above ground level, the drone
will return maintaining its current altitude. If the return point is lower than 15
meters, the drone will ascend to a 15-meter height and then return.
NOTES:
A. Return Home requires the GPS signal being within specification and with GPS
signal indicator light illuminated steadily.
B. If possible, rotate the front of drone toward the direction of the take-off point
before initiating Return Home.
C. After landing, the drone’s motors will automatically lock. If you wish to restart
the motors, set the
SWA
switch at
0
before unlocking.
GIGA-6000
