MostFun 3D printer
www.mostfun.cc
6
If your Windows is a 64 bit system, then run CP210xVCPInstaller_x64.exe
If is a 32 bit system,then run CP210xVCPInstaller_x86.exe
Click "next" after entering, and select "I accept the agreement", and then click next,
enter the installation.
After the completion you can see the following tips, That is ,The driver installation is done.
After Install the driver, we need to know the currently serial number.
Right click on the
desktop computer / this computer, select the
management
in the pop-up menu
Select the
device manager
You should see an open port named “Silicon Labs CP210x USB to UART Bridge “, If
there is no COM & LPT section, look under "Other Devices" for "Unknown Device".
write down the next serial number, you will use it in control the print software .
