Remove Front Bearing Spacer, clean, and set aside.
Remove Thrust Bearings (2x) from Outer Bearing
Housing until Static Piston is exposed.
Once Static Piston is exposed, install two 6-inch machine screws (included in Rebuild Kit) to assist in
removal of Piston. Position Removal Tool as shown (included in Rebuild Kit) and pull to remove piston.
Once Static Piston is free, remove machine screws (set aside and save for later), remove and discard
internal seals, and remove and discard external o-rings. Thoroughly clean Static Piston and set aside.
10
