210 Watt (160 Watt @12V6) x 4
AS200.4
CEA-2006-A SPECIFICATIONS
POWER RATING:
200 Watt per channel @ 4 Ohm < 1% THD+N
SN RATIO:
>86 dBA (reference: 1 Watt into 4 Ohm)
MOS SPECIFICATIONS (Tcase = 25 °C / 4 Ohm stereo / 0.2V input level @ 14.4 Volt if not otherwise specified)
TARGET POWERs:
200 Watt per channel @ 4 Ohm
320 Watt per channel @ 2 Ohm
640 Watt BTL mode @ 4 Ohm
950 Watt BTL mode @ 2 Ohm (*)
EFFECTIVE POWERs:
87.9 A (
η
= 66.3 %) @ 4 Ohm / ST mode / 1% THD / 1KHz
326 Watt (252 Watt @12V6) x 4
151.2 A (
η
= 60.0 %) @ 2 Ohm / ST mode / 1% THD / 1KHz
652 Watt (504 Watt @12V6) x 2
151.2 A (
η
= 60.0 %) @ 4 Ohm / BTL mode / 1% THD / 1KHz
THD @ 4 Ohm / ST mode:
< 0.03 % (1KHz / 90% Power rating ref)
Absolute maximum operation supply voltage range:
10 V ÷ 16 V
Bandwidth (-3dB ÷ 1 Watt):
< 5 Hz ÷ 150 KHz
Input sensitivity (Power rating ref):
0.2 V ÷ 5 V
Input impedance @ 1 KHz (STEREO input):
11 KOhm
S/N ratio (AP filter 10 Hz - 22 KHz ) - Power rating ref:
109 dB (“A” weighted)
Xover functions:
HIGH Pass & LOW Pass (BAND Pass allowed)
(20 ÷ 175Hz) & (50 ÷ 300Hz)
Filter slope - Filter “Q”:
12 dB/oct - 0.7 (Stereo & Mono)
Thermal cutoff Threshold:
88 °C (±5°C)
ProSPEED
®
Fan Controller Threshold:
55 °C (±5°C)
Load drive limitations (*):
1 Ohm / 2 Ohm (Stereo / Bridged)
Suggested fuse:
150 A (Internal)
Size:
590x200x50 mm
Weight:
5,8 Kg
(*) VERY IMPORTANT NOTE - READ CAREFULLY
4 Ohm ST or 8 Ohm BTL – CONTINUOUS SINEWAVE SIGNAL – pure resistive load or speaker load
2 Ohm ST or 4 Ohm BTL – MUSICAL SIGNAL – pure resistive load or speaker load
1 Ohm ST or 2 Ohm BTL – MUSICAL SIGNAL – speaker load only
MOS di IVAN MOSCONI
Via La Villa, loc. Ghilardino – 61034 Fossombrone (PU)
Tel. +39.0721.1830601 – Tel/Fax +39.0721.728570
[email protected] - www.mosconi-system.it
4-channel AB class amplifier available in Silver and White finishing
GLADEN AUDIO EUROPE
130.com.ua
Autogood products «130»