MCS7830 User Manual for Windows 7/ Vista
3
2. MCS7830 Device Installation & Detection:
Connect MCS7830 to the USB Host controller of the PC using a USB cable. The first
time you plug-in the cable into the USB port, Windows will start installing the device
driver software. You can see the installation status at the pop-up message of system tray.
After installation, the pop-up message says
“Your devices are ready to use”, Device
driver software installed successfully
.
MCS7830 device detection can be confirmed by checking at the Device manager. Check
for ―
MosChip High-Speed USB Ethernet Adapter
‖ under
Network adapters.
Now the MCS7830 device is ready to use.
3. Uninstalling MCS7830 Device & Drivers:
There are 3 methods to uninstall the driver for MCS7830
Method 1:
Use ―Uninst.exe‖ to uninstall the MCS7830device driver from your PC. Double click on
Uninst.exe
to run the uninstaller. You will get a ―User Account Control‖ window saying