Assembly Instructions
Step 3:
Attach bolts 2X(G), M10 washers
2X(M) and M10 Nuts 2X(J) to the left
arm (A) and right arm (B) as shown.
Hand tighten only.
Step 4:
Make sure the swing stands level and
straight (90) on the floor.
Tighten all nuts and bolts using
wrench(N & O) and Allen wrench (P).
Cover all M6 nuts by nut caps 6X(K).
Attach chain clip 4X(Q) to left arm (A)
and right arm (B) as shown.
The swing is now ready to be hung.
Consult your local hardware store for
proper hanging hardware.
Page 5 of 7