Page 9 of
15
3.
Once the firepit has cooled completely after use, cover the fire pit with the outdoor weather cover (C)
when not in use to protect it from the elements.
Figure 3
Figure 4
1. Open the door. Place the gas cylinder into the gas cylinder support and connect the regulator by
turning the black handle clockwise to tighten. To remove the regulator, turn the black handle counter
-clockwise. Secure the gas cylinder by tightening clockwise the retention point found on gas cylinder
support, so that the gas cylinder cannot move from side to side or fall down. The knob on the control
panel is turned all the way to the “OFF” position when the fire pit in NOT in use (see Figure 3).
2. Attach the door (B) to fire table (A) tenderly (see Figure 4).
B
A
C
black handle
INSTALLATION
Two or more people are helpful for an easier installation.
LOCATION
Your fire pit must be installed on flat, stable surface, away from any combustible materials or construction.
Installation Instructions
Figure 5
retention point
