Use as a generator
© MOSA
REV.0 - 11/08
18/1
1/08 22262-GB
WARNING
!
GENERATION IN C.C. (CONTINUOUS CUR-
RENT WITH MICRO-INTERRUPTION)
Machines with three pin outlets for auxiliary
supply have, at each outlet, isolated active
and neutral sockets, and an earth socket. Only
the earth socket is bonded to the frame of the
machine.
For your safety, all auxiliary equipment, exten-
sion cords, appliance cords, plugs, plug sockets
and appliances should be in good condition and
correctly wired and connected. All earthing wi-
res, qhere used, must be continuous. Extension
corde with three wires should be used except
for double insulated appliances.
The frame of the unit should not be connec-
ted to the general mass of earth by an earth
spike or by any other means, but should be
isolated from earth.
Note: in line with current practice, a floating
auxiliary power system is used. The auxiliary
power windings are not connected to the fra-
me, hence a "residual current device" is not
required.
- If the generator is used to feed more complex
circuits, or used in special environments, for
example: building sites,
it is obligatory
to
interpose between the socket and the loads a
small distribution panel complete with electrical
safeties foreseen by regulatory norms in force
in matters of electrical installation.
It is absolutely forbidden to connect the
unit to the public mains and/or another
electrical power source.
Areas for which access by non-authorized
personnel is
forbidden
are:
- the control panel (at the front) - the endo-
thermic motor discharge.
M
37
NEW MAGIC WELD
