6
7
6
To light the Main Burner
• Partially depress the right control knob and turn to the main burner position
marked . The main burner should now light.
• The lefthand knob is for burner flame adjustment. Turning it
anticlockwise should gradually increase the flame height and heat output.
Turning clockwise reduces the flame height and heat output.
• The burner flame conteol does not have to be reset every time the fire is lit.
Once set, it can be left at that position allowing you to use the right hand
control only to ignite the burner at the set flame height.
To Turn Off the Main Burner Only
• Turn the right hand control knob to the pilot position marked .
To Turn Off the Main Burner and Pilot
• Turn the right hand control knob to the pilot position marked .
Push the knob in at this position and turn to the off position marked
•.
Figure 2
Figure 3
• If the pilot does not remain alight turn the knob back to the off position
marked
•.
Wait a few seconds and repeat the lighting sequence.
