Instruction Manual
MORSØ Mitring Machine
Model F
46
Changing of Spare Parts
If it is necessary to change worn out or damaged parts we recommend that you proceed in
the following manner:
1. The index of the spare parts list (see page I-1) refers to which specific list the spare part
can be located.
2. The list in question is then used when ordering spare parts, as there are part numbers,
disassembly and assembly diagrams of the part in question.
3. Example:
Parts in the rebate support must be renewed:
Figure I-1 shows that the parts are located in figure I-6. Under index. 1, 2, and 4, the parts
necessary for the replacement, the disassembly and assembly procedure is illustrated.
In the text part of the illustration the order, number and spare part designator are stated.
If in doubt, you should call a qualified engineer.
Service
F-7
Summary of Contents for Model F
