Morso Fresh Air Box, Installation Manual

Page: 7 / 20

7 6
If the fresh air connection is to be fitted rearwards, the sheet steel panel on the rear of the
socket must be knocked out with careful small blows by the small ”bridges” that retain the panel.
The ceramic glass ring that serves as packing between the Fresh Air Box and the cast base slab
must be fitted to the Fresh Air Box, which is then screwed to the oven with the 2 screws sup-
plied.
On a Morsø 7900 fitted with
an open plinth or drawer
solution, the fresh air con-
nection can only installed
rearwards. A heat screen is
supplied with these plinths,
to be installed at the same
time as screwing on the
plinth (see sketch).
Before fitting the fresh air
box to these versions, the
two rectangular blocks in the
heat screen must be remo-
ved (see sketch).
It is not possible to fit the fresh air system to the wall-hung version or ovens on a pedestal.
Revisions Rev. Sign.:
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:5
Lukkesystem - DIBT
Closing System - DIBT
Morsø 7900
RSV
01.10.2012
A1
Date of print: 03-10-2012
U:\udv\Tegninger\7900\7900 Assembly.SLDASM
7900-107
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Revisions Rev. Sign.:
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:5
Lukkesystem - DIBT
Closing System - DIBT
Morsø 7900
RSV
01.10.2012
A1
Date of print: 03-10-2012
U:\udv\Tegninger\7900\7900 Assembly.SLDASM
7900-107
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Revisions Rev. Sign.:
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:5
Lukkesystem - DIBT
Closing System - DIBT
Morsø 7900
RSV
01.10.2012
A1
Date of print: 03-10-2012
U:\udv\Tegninger\7900\7900 Assembly.SLDASM
7900-107
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date: