15
3.0 Maintenance
When perfoming maintenance on your stove, always protect yourself, using safety goggles
and gloves.
3.1 Exterior Maintenance
The stove surface is painted with heat-resistant Senotherm paint. It is best kept clean by
vacuuming with a soft brush attachment or by wiping with a lint-free cloth.
Over a period of time, the painted surface may become slightly grey. A can of Morsø touch-up
spray paint should be available from your stove supplier. This can be applied - in accordance with
the instructions - in just a few minutes. When first firing after touching up, the stove will give off
a slight smell as the paint cures. Make sure to ventilate the room well during this phase.
3.2 Internal maintenance
Glass
If the stove is generally run at the correct temperatures, there should be little or no dirt on
the glass. If dirt does settle during lighting, most will burn off as temperatures increase.For
heavier deposits that will not burn off, use Morsø glass cleaner, applied when the glass is
cold, in accordance with the instructions. Never use abrasive cleaners on the glass surface.
Reasons for dirty glass
- Fuel too wet
- Logs too large or not split
- Combustion temperatures too low
Replace broken glass immediately.
Do not operate your stove if the glass in the door is damaged.
If you need to replace the glass, it should be replaced with the high temperature ceramic
class supplied by Morsø, contact your Morsø dealer.
Installing the glass
Never install the glass when the stove is in function.
Ceramic glass replacement
Ceramic glass cannot be recycled be-
cause it has a higher melting point that
ordinary glass. If ceramic glass is mixed
with ordinary glass, the raw material is
spoiled, and the reclaiming process may
be halted. Take care that the ovenproof
glass does not end up among ordinary
recycled waste. That will be a great
benefit to the environment.
Note: Should be handed in to a recy-
cling station as ceramic glass.
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:1
1410 NA
Morsø 1400
RSV
28.04.2010
A2
Exploded Diagram
Date of print: 28-04-2010
U:\udv\Tegninger\1400\1400 Samlingstegning.SLDASM
1400-347 a
-
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Summary of Contents for 1410
Page 7: ...7 ...
Page 22: ...22 G ...