Morsø 6100 B Series, Installation And Operating Instructions Manual

Page: 39 / 373

Report No.: 300-ELAB-2381-EPA
Date: 06.09.2019
Initials: JSA/MGJN
Page 11 of 25
300-ELAB-2381-EPA
Anomalies
Start of testing, which was otherwise scheduled to being Monday the 18 th of February, had to be
postponed for two days. Friday afternoon, the week before, there had been an accident with a
Soap stone slow heat release appliance, which slipped of the fork lifter upon dismantling from the
test rig. Several test rig accessories were broken irreparable and had to be replaced. The test rig
was not fully operational again until Wednesday the 20
th of February. The incident is recorded in
DTI’s workplace safety system.
The camera ran out of power late in the morning, so pictures of the firebed at the end of the Cold
start is missing. Further, the image of loading of the MF fuel load was delayed approximately 5
minutes (please see appendix 3) All events could however be reconstructed from the set of logger
data.
High Fire net fuel consumption
HF; 20-02-2019
Mass (kg
AF)
%-moisture Ref basis
Dry mass
(kg)
Kindling 0,454 10 WB 0,409
Start-up fuel 0,679 16,2 WB 0,569
HF fuel load 2,308 17,5 WB 1,904
Total mass entered 2,882
Tare prior to loading -0,325 0 na -0,325
Bed of embers, tared at the end -0,25 0 na -0,25
Cascaded tare -0,575 Total wood consumption 2,307
Net dry fuel mass for PM calc 0 2,307
Net dry fuel mass for burn rate calc 1,654
Test duration (hours) 00:54:44 decimal 0,9125
Resulting burn rate HF (kg/h) dry 1,813
dummy HF; 21-02-2019
Mass (kg
AF)
%-moisture Ref basis
Dry mass
(kg)
Kindling 0,461 10 WB 0,415
Start-up fuel 0,68 16,3 WB 0,569
HF fuel load 2,307 16,9 WB 1,917
Total mass entered 2,901
Tare prior to loading -0,331 0 na -0,331
Bed of embers, tared at the end -0,25 0 na -0,250
Cascaded tare -0,581 Total wood consumption 2,320
Net dry fuel mass for PM calc 0 2,320
Net dry fuel mass for burn rate calc 1,667
Test duration (hours) 00:59:45 decimal 0,996
Resulting burn rate HF (kg/h) dry 1,674