Mörser 23-4001, User Manual

Page: 3 / 8

Pg 3
APPLICATION
The Mörser Forced Action Mixers are ideal for mixing all kinds
of materials used in the building industry, as well as for tasks
where high demands are imposed on quality of the mix.
BEFORE USE
Before starting the mixer, the telescopic legs must be positioned
for the right height for draining into a bucket or wheelbarrow.
The easiest way for adjusting the legs is to lay down the mixer,
so it rests on all four wheels. The legs are released and locked
with the fitted lock splits/bolts.
BEFORE CONNECTING THE POWER SUPPLY
Before the power is connected, the mixer arms must be set in
place, and the lid must be closed. The safety grid in front of the
mixer gate must be attached at all times.
For own safety please always follow the instructions listed
above before use.
OPERATING your MÖRSER MIXER
Close the lid and lock it into place using the rubber strap. Start
the mixer by pressing the start button on the protective
motor switch. Pour the required material into the drum and
add liquid.
The protective motor switch has a zero voltage releaser. In case
of power failure, the mixer must be restarted. For safety
reasons, the mixer will not start if the lid is open.
NOTE
Never put your hand or any object into the machine when the
power is connected.
When the material has reached the desired consistency and
the mixing motion is finished, the mixing drum is emptied by
opening the mixer gate. The drum should be emptied shortly
after mixing. Depending on the material being mixed, it may
set in the mixing drum if left too long.