IMPORTANT SAFETY INFORMATION
WHILE OPERATING THE SAW
• Always use the safety glasses and hearing protection provided, or their
equivalent, when using this saw. A flying chip could cause blindness.
Cutting noise could seriously impair hearing.
• Never use the tool without the original protection guard system. Ensure that
moveable guards operate freely without restrictions.
• Do not try to defeat any safety device. Do not lock the moving guard in the
open position.
• Ensure that the cutting depth adjustment handle/angle adjustment handle and
parallel blade guide are firmly fixed while using the tool
.
• Support the work piece properly. Never hold the work piece in your hand or put
it across your legs.
• Always use both hands to operate the saw. Keep hands out of path of blade.
• Never reach around, under or behind the saw blade when operating the
machine. The guard cannot protect your hand if you do so.
• Do not touch the blade while it is in motion. Do not try to stop the blade by
lateral pressure on the blade.
• Never reach for a saw blade until the blade has completely stopped rotation
and the machine has been disconnected from the power source.
• When cutting wood, use suitable dust extraction and breathing apparatus.
• Remove the plug from main power supply before replacing the blade,
making adjustments or performing other maintenance work.
• Always keep the power cord away from the moving parts of the tool.
• Do not operate in damp or wet conditions or areas – electric sparks may occur.
You could suffer serious injury, or death from electrocution, burns or electrical
shock.
• In case of saw jamming, immediately switch off the saw and disconnect the plug.
Remove the saw from the material and inspect the blade for damage.
• Use only the flanges and washers that are supplied with the tool. Replace them
with original (OEM) replacement parts if they become damaged or scored.
• When storing the tool, switch off the motor, unplug the cord from the power
source and ensure that all moving parts have come to a complete stop.
3
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE!
Summary of Contents for Metal Devil CSM7NXTB
Page 29: ...CSM7NXTB ...
