background image

Safety Information (continued)

DANGER

 - Indicates a situation which, if not avoided, 

will

 result in 

serious injury or death.  This signal word is limited to the most extreme 

situations.

WARNING

 - Indicates a situation which, if not avoided, 

could

 result in 

serious injury or death.

CAUTION

 

- Indicates a situation which, if not avoided, can result in 

damage to the machine.

CAUTION

 

– Do Not Transport with Drum Raised

ALWAYS LOWER THE DRUM HOLDER TO LOWEST POSITION BEFORE TRANSPORTING. 

 The unit 

can become unstable when transporting with a raised load.

DANGER

 - Stay Clear of Power Lines

KEEP WELL CLEAR OF POWER LINES. 

 Never approach a power line.  Current in a high voltage line 

may arc some distance from the wire to the steel framed, grounded machine.

WARNING

The Hydra-Lift Karrier is designed to handle one drum of the types listed at the top of page 3, under 

2.  

Machine Description

.  

DO NOT

 attempt to handle any other type of drum or object.  

DO NOT

 exceed 

the weight capacity of 800 Lb.

WARNING

 

- Level Floors Only

For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, 

ramps, irregular or debris strewn floors.

WARNING

 - Do Not Modify the Unit

Under no circumstances should any modifications be made to the Morse machinery without factory 

authorization.  Any modifications may void the warranty.  This machine was designed to perform a specific 

job and alterations may result in injury to operator or machine.

WARNING

 - No Loose Fitting Clothing

Wear close-fitting clothing and safety equipment appropriate to the job.  Loose fitting clothing may 

become caught on the machinery and cause severe personal injury.

WARNING

 - Hydraulic Fluid Under Pressure Can Be Hazardous

Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury.  Avoid the hazard 

by relieving pressure before disconnecting hydraulic lines.  Keep hands and body away from pinholes 

and nozzles, which eject fluid under high pressure.  Use a piece of cardboard to search for leaks. If an 

accident occurs, see a doctor immediately and inform them of the nature of the accident.

CAUTION

 - Wear Safety Shoes

Wear safety shoes with non-slip soles and hard toe protection.

Copyright 2009  -  Morse Mfg. Co., Inc.   

Form PL400-60 (0604-0309)    (Updated 10/2009) 

 

Page 2

Operator’s Manual for Morse Hydra-Lift Drum Karrier Model 400A-60

Serial Number 0604 to 0309 (MMYY)

The Specialist In Drum Handling Equipment

Model 400A-60

Hydra-Lift, 60”, Manual Lift, Manual Tilt

Summary of Contents for Hydra-Lift 400A-60












Reviews: