morse 82A-125 Operator'S Manual Download Page 2

The Specialist In Drum Handling Equipment

MODEL 82A-125

Mobile-Karrier / Palletizer 

with DC Power Lift

Operator’s Manual for Model 82A-125 Morse Mobile-Karrier / Palletizer

Serial Number 0509 to 1110 (MMYY)

MorseDrum.com

Copyright 2010  -  Morse Mfg. Co., Inc. 

 

Form PL82A-125 (0509-1110) 

(Updated December 2, 2010 8:30 AM)

 

       

2

Safety Information

 (continued)

DANGER

 

- Indicates a situation which, if not avoided, will result in serious injury or death.  

This signal word is limited to the most extreme situations.

WARNING

 

-  Indicates  a  situation  which,  if  not  avoided,  could  result  in  serious  injury  or 

death.

CAUTION

 

- Indicates a situation which, if not avoided, can result in damage to the machine.

CAUTION

 

– Do Not Transport with Drum Raised. Always lower the drum holder to lowest position 

before transporting.

WARNING

 

- The Mobile-Karrier / Palletizer is designed to handle one drum of the types listed at the 

top of page 3.  Machine Description.  DO NOT attempt to handle any other type of drum or object.  DO 

NOT exceed the weight capacity of 800 Lb.

WARNING

 

- Level Floors Only 

 

For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, 

ramps, irregular or debris strewn floors.

WARNING

 

- Do Not Modify the Unit. Under no circumstances should any modifications be made to 

the Morse machinery without factory authorization.  Any modifications may void the warranty.  This 

machine was designed to perform a specific job and alterations may result in injury to operator or 

machine.

WARNING

 

- No Loose Fitting Clothing. Wear close-fitting clothing and safety equipment appropriate 

to the job.  Loose fitting clothing may become caught on the machinery and cause severe personal 

injury.

WARNING

 

- Hydraulic Fluid Under Pressure Can Be Hazardous 

 

Escaping  hydraulic  fluid  under  pressure  can  penetrate  the  skin,  causing  serious  injury.   Avoid  the 

hazard by relieving pressure before disconnecting hydraulic lines.  Keep hands and body away from 

pinholes and nozzles, which eject fluid under high pressure.  Use a piece of cardboard to search for 

leaks. If an accident occurs, see a doctor immediately and inform them of the nature of the accident.

CAUTION

 

- Wear safety shoes with non-slip soles and hard toe protection.

CAUTION

 

- DO NOT allow drum to impact on floor, ground, or dumping station, etc.

Summary of Contents for 82A-125







Reviews: