The Specialist In Drum Handling Equipment
42 Series
Drum Lifters
operator’s Manual for Morse 42 Series Drum Lifters
Serial number 0892 to ____ (MMYY)
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form OM42 (0892-____)
(Updated 14 Jun, 2019 11:38 AM)
3
Machine Description
Morse 42 Series Drum Lifters are designed to lift and transport a standard 55-gallon (210 liter) steel
drum 22.5” (57.2 cm) in diameter and 34” to 36” (86.4 to 91.4 cm) tall, or an 85-gallon (322 liter) steel
drum 26” (66 cm) in diameter and 40” (101.6 cm) tall. Drums can be transferred in horizontal or in off-
vertical mode (see operating instructions). The maximum capacity is 2000 Lb. (907 kg). Drums may
be “tight head” type with head intact, or removable top with lid securely clamped in place.
* Do not lift a drum in the vertical position with the model 42.
Important
Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and take all necessary precautions. Safety shoes, work gloves, hard hat
1.
and other personal protective devices are recommended.
Please read all instructions thoroughly before attempting to operate your new Morse drum handler.
2.
The 42 Series Drum Lifters have a maximum capacity rating of 2000 Lb.
3.
(907 kg) and are designed to lift and move a closed steel drum of the size
and type noted above. DO NOT exceed this rating. Exceeding this rating or handling drums other than those mentioned above is unsafe and could
result in equipment damage, excessive wear, awkward or dangerous handling.
When loading, unloading, operating, or maintaining your MORSE drum handler, always use care and good
4.
judgment. Maintain secure footing and a firm hold. Keep hands and loose clothing away from all moving parts.
Never allow anyone to be below any part of a raised drum handler or drum. Read operating instructions and
review the pictures in the sales brochure before operation.
The 42 Series Drum Lifters are covered by the American National Standard ASME B30.9. The user should
5.
comply with all aspects of this standard. Unit has been factory load tested and furnished with a load test
certificate.
operating Instructions
Horizontal Mode
Attach your hoist hook to lifting ring of 42 Series Drum Lifter connected to rod and chain at middle of assembly.
1.
Move hoist with Drum Lifter over the drum and lower it. Hoist should be guided so that Drum Lifter settles
2.
across the center of the horizontal drum.
Place a lifting hook on each end of the drum below the drum rim.
3.
Raise hoist to lift the drum. You may move the drum as necessary by moving the hoist.
4.
To place the drum, simply lower the hoist. Continue to lower hoist so that the lifting hooks may be removed.
5.
Raise the hoist to lift the Drum Lifter clear of the drum.
6.
Off-Vertical Mode for upending a horizontal drum
Attach your hoist hook to the lifting ring on outer end of alloy chain of 42 Series Drum Lifter.
1.
Place a lifting hook on each end of horizontal drum engaging below the top and bottom rims of horizontal drum.
2.
Raise hoist to lift drum and have it hang off-vertical.
3.
Lower drum until its bottom edge meets the floor.
4.
Remove bottom hook and guide drum by hand to settle upright.
5.
Off-Vertical Mode for down ending a vertical drum
Attach your hoist hook to the lifting ring on outer end of alloy chain of 42 Series Drum Lifter.
1.
Place a lifting hook engaging the top rim of upright drum.
2.
Place second hook to engage under the bottom rim of upright drum. Hint: Tilt drum and insert a 2 x 4 under the
3.
bottom rim to allow space to place hook under drum.
Raise hoist to lift drum and have it hang off-vertical.
4.
Lower drum until its bottom edge meets floor and guide drum to settle in horizontal position.
5.
Maintenance
Periodically inspect framework and contact areas for signs of wear, fatigue or loosening. Replace as necessary to prevent failure.
1.
Horizontal
Mode
Off-Vertical
Mode