The Specialist In Drum Handling Equipment
Model 410M-114
Heavy-Duty Hydra-Lift, 72”, Air Power Lift & Tilt,
with Spark Resistant Parts
operator’s Manual for Morse Heavy-Duty Hydra-Lift Karrier with Spark Resistant Parts
Model 410M-114 Serial number 1210 to ____ (MMYY)
Copyright 2021 - Morse Mfg. Co., Inc.
Form OM410M-114 (1210-____)
(Updated 6 Jul, 2021)
3
Machine Description
The Model 410M-114 Heavy-Duty Hydra-Lift Karrier will pour a
drum up to 72” (183 cm) high, measured from the floor to the
lowest point of a horizontal drum. It is designed to lift, transport,
and dispense a 55-gallon (210 liter) steel or fiber drum 22” to 23.5”
(56 to 59.7 cm) in diameter.
The maximum full-drum capacity is 1200 Lb. (544 kg). The
capacity is derated to 600 Lb. (272 kg) for a half-full drum. The
half-full rating is based on the tilt mechanism’s capacity for
handling an unbalanced bottom-heavy drum.
options
A smaller diameter drum can be handled with the correct
•
size 55/30M Series Diameter Adapter installed (see
).
The adjustable Bracket Assembly (Kit # 4556M-P) is
•
required
to handle a plastic drum without a top rim (see figure 2.1). The
Bracket Assembly is also recommended when handling a fiber
drum. You can also use the Bracket Assembly when handling
a rimmed drum.
To handle a 55-gallon (210 liter) plastic drum with suitable top
•
rim, you
must
install either the Bracket Assembly or the Top
Rim Clamp (Kit # 4560M-P) (see figure 2.2). You can use the
Top Rim Clamp to handle a 55-gallon plastic, steel or fiber
drum with suitable top rim.
Controls
The Morse Heavy-Duty Hydra-Lift Karrier is manually propelled and steered.
The hydraulic pump is powered by a vane type air motor. The air motor is
control by a momentary air valve located on the air motor. Attach air supply to
the air valve.
There are two functions for the operator to control (Figure 2.3):
1. LIFT and lower function for vertical positioning of the drum.
To raise the drum, hold the air valve handle in the on position and raise the
•
LIFT handle. Release the two valve handles when desired drum height is
reached.
To lower the drum, push in the LOWER handle. Air motor is not needed.
•
2. TILT function to control the degree of rotation of the drum.
To tilt the drum forward for pouring, hold the air valve handle in the on
•
position and raise the TILT handle. Release the two valve handles when
drum angle is reached.
To return the drum to vertical position, hold the air valve handle in the on
•
position and push down on the TILT handle.
Figure 2.3
Figure 2.2
Plastic drum being lifted
with Kit # 4560M-P Top
Rim Clamp Assembly
installed.
Figure 2.1
Plastic drum being lifted
with Kit # 4556M-P Bracket
Assembly installed.
