morse 400A-96-110 Operator'S Manual Download Page 3

Copyright 2009  -  Morse Mfg. Co., Inc.   

Form PL400-96-110 (0804-0309)   (Updated 3/2009) 

 

Page 3

The Specialist In Drum Handling Equipment

Model 400A-96-110

Hydra-Lift, 96”, AC Power Lift & Tilt

Machine Description

The Model 400A-96-110 Hydra-Lift Karrier will pour a drum up to 96” high, measured from the floor to the lowest point of a hori

-

zontal drum. It is designed to lift, transport, and dispense a ribbed 55-gallon steel drum 22.5” in diameter.

• 

A smaller diameter drum can be handled with the correct size 55/30 Series Diameter Adaptor installed 

 

(see Diameter Adaptor literature)

• 

A 55-gallon plastic drum can be handled if the unit is equipped with an Adjustable Bracket (Option HDPS) or Top Rim 

Clamp (Option HDRC) 

(see plastic drum option manual).

The maximum full-drum capacity is 800 Lb. The capacity is derated to 500 Lb. for a half-full drum. The half-full rating is based 

on the tilt mechanism’s capacity for handling an unbalanced 

bottom-heavy drum.

Controls

The Morse Hydra-Lift Karrier is manually propelled and steered. 

The drum lift and tilt controls are powered by a single phase 

115V AC motor with a momentary switch, cord and plug.

There  are  two  functions  for  the  operator  to  control  (Figure 

2.1):

1.  “

LIFT

”  and  lower  function  for  vertical  positioning  of  the 

drum

2.  “

TILT

”  function  to  control  the  degree  of  rotation  of  the 

drum

1.  LIFT and Lower Function

To raise the drum

a. Plug the motor into a standard 115V power sup

-

ply.

b. Turn  the  motor  on  by  holding  the  momentary 

switch in the on position.

c. With the motor on, raise the LIFT handle.

To lower the drum

a. With the motor off, push in the LOWER handle.

2.  TILT Function

To tilt the drum forward for pouring

a. Turn on the motor by holding momentary switch 

in the on position.

b. With the motor on, raise the tilt handle.

To return the drum to vertical position

a. Turn on the motor by holding momentary switch 

in the on position.

b. Push the tilt handle down.

Figure 2.1

Operator’s Manual for Morse Hydra-Lift Drum Karrier Model 400A-96-110 

Serial Number 0804 to 0309 (MMYY)

Summary of Contents for 400A-96-110










Reviews: