The Specialist In Drum Handling Equipment
311 Series
Automated Tilt-To-Load Drum Rotators
Operator’s Manual for Morse 311 Series Automated Tilt-To-Load Drum Rotators
Serial Number 309425 to 315600
Copyright 2021 - Morse Mfg. Co., Inc.
Form PL311 (309425-315600)
(Updated 12 Mar, 2021)
3
Machine Description
The Morse 311 Series Automated Tilt-To-Load Drum Rotators are designed to receive an upright
steel, plastic or fiber drum at floor level, hydraulically tilt up to clear the floor, and rotate the drum
“corner-over-corner” between 5 and 20 RPM (4 to 16 RPM with 50Hz models). The maximum full
drum capacity is 800 Lb. (363 kg). Capacity is derated to 400 Lb. (181 kg) for a half-full drum. Half-full
Capacity is an indication of the capacity for tilting a bottom-heavy drum. A partially full drum with an
unbalanced and shifting load is harder to tilt than a full drum.
Drum Holder
The drum holder is the component on the Automated Tilt-To-Load Drum Rotator that securely holds the drum for rotating. The drum
holder features the web strap and ratchet mechanism for tightening the drum at the middle and two top clamps for holding the drum end-
to-end.
Installation -
Install reservoir breather BEFORE operation.
Automated Tilt-To-Load Rotators are shipped filled with hydraulic fluid (Dexron 3 or
equivalent). The base has four holes spaced 36” (91.44 cm) wide x 59.5” (151.13 cm)
long. Morse recommends the rotator be secured to the floor using 5/8” x 3” lag bolts.
Install all Morse Rotators in accordance with OSHA requirements for enclosure and
safety interlock, etc. Drum rotator must automatically turn off when enclosure door is
opened (see enclosure instructions).
Important
Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and take all necessary precautions. Safety shoes, work
1.
gloves, hard hat and other personal protective devices are recommended.
Please read all instructions thoroughly before attempting to operate your new Morse drum handler.
2.
When loading, unloading, operating, or maintaining your MORSE drum handler, always use care and good judgment. Maintain
3.
secure footing and a firm hold. Keep hands and loose clothing away from all moving parts. Never allow anyone to be below any
part of a raised drum handler or drum. Read operating instructions and review the pictures in the sales brochure before operation.