morse 201B Series Operator'S Manual Download Page 2

The Specialist In Drum Handling Equipment

201B Series

Belted Portable Drum Rollers

operator’s Manual for Morse 201B Series Portable Drum Rollers

Serial number 286584 to ______

morsedrum.com

Copyright 2019  -  Morse Mfg. Co., Inc. 

 

Form OM201B (286584-______)  (Updated 14 Jun, 2019 3:36 PM)

               

2

Safety Information

 (continued)

DAnGeR 

- Indicates a situation which, if not avoided, will result in serious injury or death.  

This signal word is limited to the most extreme situations.

WARnInG 

- Indicates a situation which, if not avoided, could result in serious injury or 

death.

CAUtIon 

- Indicates a situation which, if not avoided, can result in damage to the machine.

DAnGeR 

- Stay Clear of Rotating Drum. NEVER allow anyone to be near any part of the rotating 

drum.  Operator should remain clear of the Roller.

WARnInG 

- The 201B Series Drum Rollers are designed to handle one drum of the types listed at 

the top of page 3 under Machine Description.  DO NOT attempt to handle any other type of drum or 

object.  DO NOT exceed the weight capacity.

WARnInG 

- Do Not Modify the Unit. Under no circumstances should any modifications be made to 

the Morse machinery without factory authorization.  Any modifications may void the warranty.  This 

machine was designed to perform a specific job and alterations may result in injury to operator or 

machine.

WARnInG 

- No Loose Fitting Clothing. Wear close-fitting clothing and safety equipment appropriate 

to the job.  Loose fitting clothing may become caught on the machinery and cause severe personal 

injury.

CAUtIon 

- Wear safety shoes with non-slip soles and hard toe protection.

CAUtIon 

-  DO NOT allow drum to impact on floor, ground, etc.

CAUtIon 

- Install Morse Rollers in accordance with OSHA requirements for enclosure and interlock, 

etc. For OSHA compliance, see OSHA subpart O.1910.212 “General Requirements for all Machines.” 

Power connections and motor controls must comply with applicable codes.

WARnInG: 

This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 

2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to 

the State of California to cause birth defects or other reproductive harm.  

For more information go to 

www.P65Warnings.ca.gov

Summary of Contents for 201B Series

Page 1: ...g equipment is guaranteed against defects in workmanship or materials for two years when used properly within its rated capacity Warranty does not cover wear from normal use or damage from accident or abuse Motors and other purchased parts carry the warranties of their manufacturers For warranty claims contact your Morse Dealer to obtain a return authorization number and for return freight advice ...

Page 2: ...NING Do Not Modify the Unit Under no circumstances should any modifications be made to the Morse machinery without factory authorization Any modifications may void the warranty This machine was designed to perform a specific job and alterations may result in injury to operator or machine WARNING No Loose Fitting Clothing Wear close fitting clothing and safety equipment appropriate to the job Loose...

Page 3: ...dler 2 When loading unloading operating or maintaining your MORSE drum Roller always use care and good judgment Maintain secure 3 footing and a firm hold Keep hands and loose clothing away from all moving parts Never allow anyone to be below any part of a raised drum handler or drum Read operating instructions and review the pictures in the sales brochure before operation Morse Rollers do not comp...

Page 4: ...nd pull back on tipping lever until drum is broken over remove foot and continue lowering until Roller and drum are horizontal Remove hook lever from drum 3 Slide drum positioner through collars attached to frame Place wear pad against drum to prevent lateral movement Tighten collar set screws Drum positioner can be adjusted for lengths up to 35 89 cm 4 Drum is now ready to be rotated or moved to ...

Reviews: