Tools Needed
- T40 Torx Socket
- 1/2" Socket
- 13mm Wrench
- 1/2" Wrench
- 10mm Socket
www.MORryde.com • 574.293.1581
Heavy. Duty. Adventure.
STEP 1
Using a 10mm socket,
remove the nuts (6)
that hold the nerf bar to
the pinch seam on the
underside of the Jeep.
STEP 3
Carefully remove the nerf bar from the Jeep.
STEP 4
Using a T40 Torx bit,
remove the 2 bolts on the
side of the Jeep that fasten
the windshield bracket to
the windshield’s pillar.
STEP 2
Using a 13mm socket,
remove the bolts (3) that
attach the nerf bar to the
floor boards of the Jeep.
JP54-063
*
Images after STEP 5 are shown without the tray attached for attachment details.
STEP 5
*
Line up the Jerry can
tray/rotopax mount on
the side mount
(before it
is installed on the Jeep).
STEP 6
Using (2) ½" wrenches,
install the Tray/Mount in the
desired location on the side
mount using the provided
5/16"-18 x 1" hardware.
I N S TA L L AT I O N I N S T R U C T I O N S
Side mount
with Tray
J K
YJ
TJ
J L
