www.MORryde.com • 574.293.1581
Heavy. Duty. Adventure.
STEP
9
Install Cross Support bracket using
(4) supplied ¼"-20 button head
bolts and (4) supplied ¼"-20
nylock nuts.
STEP
8
Install passenger side rack support
by inserting (2) supplied hinge clips
into the right-most holes in the
tailgate hinges and bolting through
support into the hinge clips using
(2) supplied 5/16"-18 bolts.
I N S TA L L AT I O N I N S T R U C T I O N S
Overland rack
J K
YJ
TJ
CJ
JP54-035
STEP
11
Fasten tray to supports using (9)
supplied ¼"-20 button head bolts
and (9) supplied nylock nuts.
STEP
1O
Place tray on top of supports and
line up bolt holes to ensure that tray
is oriented in the correct direction
with the provisions for a third brake
light facing away from the Jeep.
NOTE:
Heavy Duty Hinges may need to be adjusted after loading the Overland rack to accommodate the added weight.
STEP
12
Ensure that Overland rack
tray is level to the ground and
tighten down hardware.
STEP
13
Reinstall third brake light.
NOTE:
Depending on the size of the
spare and what spare tire carrier is
installed on the Jeep, the Overland
Rack may obscure the third brake light.
Provisions are in place on the top-most,
horizontal tube in the Overland Rack
tray to allow for the install of a third
brake light.
