12
Additional problems
Symptom
Possible Cause
Remedy
Poor Acceleration.
Clogged air cleaner element.
Clean the element.
Clogged fuel filter.
Replace the fuel filter as required.
Carburettor mixture too lean.
Return chainsaw to the dealer.
Idle speed set too low.
Adjust: Refer to specs pg. 12.
Engine stops abruptly.
Fuel tank empty.
Refuel.
Clogged fuel filter.
Clean or replace the fuel filter as
required.
Water in the fuel.
Drain; replace with clean fuel.
Shorted spark plug or loose terminal.
Clean and replace spark tighten the
terminal.
Ignition failure.
Return chainsaw to the dealer.
Piston seizure.
Return chainsaw to the dealer.
Engine difficult to shut off.
Ground (stop) wire is disconnected, or switch is
defective.
Test and replace as required.
Overheating due to incorrect spark plug.
Use correctly specified plug
Overheated engine.
Idle engine until cool.
Excessive vibration.
Warped or damaged chainsaw fan.
Inspect and replace fan as required.
Loose bolt or fastener.
Tighten as required.
Internal engine damage.
Return chainsaw to dealer.
Chain oiler problems
Symptom
Possible Cause
Remedy
Oil does not come out.
Oil tank empty.
Clean and fill
Oil passages and ports clogged.
Clean and check
Check oil is of specified quality.
Replace with correctly specified oil
If the chainsaw seems to need further service, please consult with an authorised service agent in your area.