INSTALLATION AND USER MANUAL
ECOHEAT
1
V1REV4EN1221
1. INTRODUCTION
This product, has been manufactured according to the European Quality Standards,
incorporates prime grade materials and its correct working has been tested before it leaves
our facilities.
Through this Installation and User Manual, you will be guide towards the correct and safety
installation of the product. It is necessary to carefully read this manual before making any
handling to avoid problems arising from the misuse of the product.
The company CLIMER TECHNOLOGY reserves the right to modify the information included
in this document at any time without prior notice.
2. GENERAL INDICATIONS
2.1. Safety notes
- The incorrect or inappropriate use of this product could lead to hazardous situations,
causing damage or injuries to the user, third parties or even to the product itself or
material goods.
- The installer has the responsibility to install the minimum safety devices (hydraulic
and electrical) set out in this Manual. In case of failure, the lack of any device may
cause burns or other injuries.
- The installer has the responsibility to inform the user about the function and
placement of the safety devices installed into the device and the installation.
- The water outlet temperature could reach 62 degrees. Do not touch the pipes while
the system is working to avoid any risk of burns.
2.2. Installer’s qualification
Since the installation of the ECOHEAT involves handling coolant as well as carry out
welding work, it is needed the technical staff have the official certification that accredits
them as authorized to handle coolants.
The installer must explain the user the application of the product and the use and
management of the unit, and he should provide the user all the documentation supplied
with the equipment.
