WHITEHALL MANUFACTURING
•
P.O. BOX 3527
•
City of Industry, CA 91744-0527 U.S.A.
Phone (800) 782-7706
•
(626) 968-6681
•
Fax (626) 855-4862
•
www.whitehallmfg.com
17
Draining Instructions
1. Turn the turbine power switch off to stop water
circulation.
2.
–SL models w/o separate drain pump
Either open drain valve (2) and drain to floor or
a. Lower turbine to lowest position and lock in place.
b. Lift discharge nozzle (5) from storage socket (6)
and place in sink.
c. Turn pressure control valve handle (3) fully
counterclockwise. This diverts water to the hose
(1).
d. Place and hold discharge nozzle (5) into sink
then turn the turbine power switch (4) on to start
draining to sink.
e. When water stops discharging from the nozzle, turn the turbine power switch (4) off.
f. Drain remaining water using drain valve (2) or by using a dry sponge.
3.
-S and
–SP models
with:
a. Standard drain and overflow (Figure 8 and Figure 9): Lift combination drain and
overflow assembly handle (15).
b. Separate drain and overflow (Figure 10): Turn handle (15) clockwise to open drain
valve (16).
Figure 8: -S model with standard drain
and overflow
Figure 9: SB-100-S with standard drain and
overflow
Figure 10: -S model with separate
drain and overflow (-SDO)
Figure 7: Draining the tub on the -SL model
