speed is too high and should be reduced. Adversely, if the food materials are moving above the blade, it
means that the speed is too slow and needs to be increased.
Take the jar off the machine base ONLY after the machine is turned off and the blades’ rotation has
completely stopped.
If the motor is not cool enough, the machine probably cannot operate, or starts operation for a short time
and turns off again.
Motor Over-heat
1.
Check whether the power plug is loose.
2.
Check whether the blender operates according to the instructions.
3.
Check whether the food materials inside are too sticky
4.
Check whether the quantity of the food material is very large.
5.
Check if the speed is too low and whether the blender operates for a long time.
6.
In case over-heat protection shuts off the appliance after a long blending time, you can turn off the
appliance, take away the jar and blow the machine body with cool wind to lower the temperature.
7.
Always make sure to start the appliance at low speed or Pulse position, let food ingredients to be processed
preliminarily, then adjust to high speed or regular blending for further blending.
8.
Do not fill with materials above the MAX indication on the jar. For thick materials like sauce, please reduce
the quantity accordingly.
9.
If you want to insert the Stick into the jar, please make sure the food material does not exceed 2/3 of the
Maximum capacity. Meanwhile, do not use the Stick to stir the food more than 30 seconds, use it
depending on the food rotation conditions.
10.
If the appliance is turned OFF automatically due to thick ingredients or long time operation, pull off the
power plug, press the reset button at the bottom of the appliance, then connect to the power supply again
to restart. If this does not work, wait until the motor temperature is cooled down (you can use a fan for
faster results).
Nutrition Tips
Cut food material into around 3.75CM pieces, fill in with water (2/3 of jar capacity), close the Lids at
position and set the speed setting at middle to mix the food materials for around 1~5 seconds. When the
food rises to the top of the Jar, turn off the appliance immediately and pour the mixture into a strainer (if
needed). Rinse with clean water.
Cut the ice: Put ice into the jar, fill with 3/4 of water so that the ice floats 1.25cm above the blades, turn on
the appliance to process at high speed for around 2~3 seconds. Filtrate the water to get cut ice.
When blending for vegetable juice, besides water, you can add milk as an alternative.
When using the Grinding function (dry blending with no liquid added), do not run it for over 90 seconds
each time. If the thickness does not reach your requirement, the better way is to stop the machine and wait
for 1 minute and then turn it on again for 60 seconds.
Making Fruit or Vegetable Juice
Cut the fruits or vegetables into small pieces (around 3.50cm in size) and put them into the blender jar. Add
water and ice according to your personal preference. Seal the lid and lid plug and turn on the appliance. Start
with slow speed then adjust to high speed for processing the juice until you get the desired smooth result.
Making Jams/Sauces
When making jams/sauces, cut the food to about 2.5cm in size, and put them into the container. Then add 15
– 150ml of liquid (water/soup/juice/oil fat…etc) depending on the food material’s moisture level and quantity.
If you need the food inside the jar to make a swirl, you can turn the speed setting between middle and high.